Notify me when new publications are added.
This publication provides information you will need for measuring soil water: types of soil-water measuring devices, how to select the right measuring device and how to prepare and install these devices.
This publication presents basic information on factors (veil, water and plant relationships) to be considered in developing an effective irrigation schedule.
The center pivot and linear-move type irrigation systems are usually the most practical system for irrigating large, rectangular or regular shaped fields. Selection and management considerations for center pivot and linear-move type systems are discussed in this article.
The self-propelled gun type traveler system is usually the most practical system for irrigating irregular shaped fields. Selection and management considerations for self-propelled gun type systems are discussed in this article.
This publication explains how you can make the most efficient use of water and energy by applying the right amount of water to cropland at the right time.
Hand-move irrigation systems are normally used to irrigate small fields. Solid-set and permanent sprinkler irrigation systems are used for irrigation, frost/freeze protection, evaporative cooling, and land application of nutrient-rich effluent. Selection and management considerations for hand-move solid-set and permanent sprinkler irrigation systems are discussed in this article.
Low volume irrigation systems are normally used for fruits, vegetables, container nursery plants and in the landscape. For all these uses, growers are interested in highly controlled water management systems. Selection and management considerations for low volume irrigation systems are discussed in this article.
This publication discusses irrigation decisions that affect water and energy efficiencies.
This publication discusses the causes of poor irrigation system performance. Some of these causes can be identified and corrected by the irrigator. Others require specialized evaluation equipment, and the corrections should therefore be performed by specially trained technicians.
